UK Karting

Notice Board
2-Stroke Karting


Welcome to the 2-Stroke Karting Forum. Please post questions and messages here that relate only to 2-Stroke. For General Karting, 4-Stroke and Chat please use the individual forums.






Tip: If you register you can customise the way messages are displayed.
Already registered? Log On to restore your preferences.


petrol/oil mix -- rotax  by 'Simon43'   (28 Apr 2010 @ 12:21)
Re: petrol/oil mix -- rotax  by 'alanrr'   (28 Apr 2010 @ 12:34)
Re: petrol/oil mix -- rotax  by 'HappyWheels77'   (29 Apr 2010 @ 13:12)
Re: petrol/oil mix -- rotax  by 'Ditch'   (01 May 2010 @ 9:45)

Helmet Painter on The North West ?  by 'buzzinrussell'   (28 Apr 2010 @ 10:00)
Re: Helmet Painter on The North West ?  by 'dynamax'   (28 Apr 2010 @ 21:06)
Re: Helmet Painter on The North West ?  by 'philharrison'   (28 Apr 2010 @ 22:06)
Re: Helmet Painter on The North West ?  by 'Booney'   (28 Apr 2010 @ 23:07)

gary munro (gfm) ..what does he charge/rebuild  by 'Simon43'   (28 Apr 2010 @ 0:27)
Re: gary munro (gfm) ..what does he charge/rebuild  by 'alanrr'   (28 Apr 2010 @ 10:41)
Re: gary munro (gfm) ..what does he charge/rebuild  by 'kelvyn'   (28 Apr 2010 @ 15:07)
Re: gary munro (gfm) ..what does he charge/rebuild  by 'sawf'   (28 Apr 2010 @ 21:12)
Re: gary munro (gfm) ..what does he charge/rebuild  by 'speedyman'   (30 Apr 2010 @ 17:01)

help needed - can't remove bolt on rear hub  by 'Simon43'   (27 Apr 2010 @ 23:54)
Re: help needed - can't remove bolt on rear hub  by 'itpro'   (28 Apr 2010 @ 0:47)
Re: help needed - can't remove bolt on rear hub  by 'KayakJack'   (28 Apr 2010 @ 2:33)
lots of WD 40 and Heat also..  by 'Chads'   (28 Apr 2010 @ 2:55)
Re: lots of WD 40 and Heat also..  by 'alanrr'   (28 Apr 2010 @ 11:34)
Re: stuck in bolt  by 'waveydavey42'   (28 Apr 2010 @ 16:04)
Re: stuck in bolt  by 'Cadet49Dad'   (28 Apr 2010 @ 17:54)
Re: help needed - can't remove bolt on rear hub  by 'lbsf1'   (28 Apr 2010 @ 17:45)
lbsF1 ..i think you should try it first ..  by 'Chads'   (28 Apr 2010 @ 22:49)
Re: lbsF1 ..i think you should try it first ..  by 'itpro'   (29 Apr 2010 @ 1:06)
Re: lbsF1 ..i think you should try it first ..  by 'Crashlanding'   (29 Apr 2010 @ 8:46)
Re: lbsF1 ..i think you should try it first ..  by 'markmorton'   (29 Apr 2010 @ 16:44)

Kimbolton Gearing - Masters or 177  by 'Rickers'   (27 Apr 2010 @ 23:06)
Re: Kimbolton Gearing - Masters or 177  by 'sawf'   (28 Apr 2010 @ 21:10)
Re: Kimbolton Gearing - Masters or 177  by 'Rickers'   (28 Apr 2010 @ 22:31)

Questions for the gearbox karts  by 'Booney'   (27 Apr 2010 @ 22:54)
Re: Questions for the gearbox karts  by 'mini60matt'   (27 Apr 2010 @ 23:03)
Re: Questions for the gearbox karts  by 'ste'   (28 Apr 2010 @ 8:05)
Re: Questions for the gearbox karts  by 'AMB'   (28 Apr 2010 @ 8:30)
Re: Questions for the gearbox karts  by '250nat23'   (28 Apr 2010 @ 13:36)
125 Gearbox Rental  by 'andy2004uk90'   (28 Apr 2010 @ 13:45)
Re: 125 Gearbox Rental  by 'swanseajack'   (28 Apr 2010 @ 14:13)
Re: 125 Gearbox Rental  by 'Booney'   (28 Apr 2010 @ 23:05)
Re: 125 Gearbox Rental  by 'DBaldwin'   (30 Apr 2010 @ 10:38)

Petrol mixture.  by 'Littlebranch'   (27 Apr 2010 @ 21:17)
Re: Petrol mixture.  by 'dave15'   (27 Apr 2010 @ 21:32)
Re: Petrol mixture.  by 'Littlebranch'   (28 Apr 2010 @ 15:06)
Re: Petrol mixture.  by 'waveydavey42'   (28 Apr 2010 @ 16:08)
Re: Petrol mixture.  by 'dave15'   (29 Apr 2010 @ 14:49)

Super1 Guest Drives.  by 'jtthedevil'   (27 Apr 2010 @ 19:28)
Re: Super1 Guest Drives.  by 'RevvedUp'   (28 Apr 2010 @ 18:05)

a basic starting point for rear/front width...  by 'Simon43'   (27 Apr 2010 @ 14:30)
Re: a basic starting point for rear/front width...  by 'davidmc'   (27 Apr 2010 @ 14:40)

best make of battery to buy(rotax)  by 'Simon43'   (27 Apr 2010 @ 12:38)
Re: best make of battery to buy(rotax)  by 'alanrr'   (28 Apr 2010 @ 11:41)

S1 ROWRAH, on tv, when  by 'Brasic'   (26 Apr 2010 @ 20:43)
Never!  by 'rendall'   (26 Apr 2010 @ 21:51)

Why the new Rotax Max clutch will slip.  by 'AlfieMoon'   (26 Apr 2010 @ 18:44)
Re: Why the new Rotax Max clutch will slip.  by 'BanzaiBoy'   (27 Apr 2010 @ 9:04)
Re: Why the new Rotax Max clutch will slip.  by 'DanMax66'   (27 Apr 2010 @ 18:32)
Re: Why the new Rotax Max clutch will slip.  by 'alanrr'   (28 Apr 2010 @ 13:07)
Forgot, honk HONK honk HONK honk!!!!!!!!!!!!!!!!!!  by 'alanrr'   (28 Apr 2010 @ 13:11)
Re: Forgot, honk HONK honk HONK honk!!!!!!!!!!!!!!  by 'andy2004uk90'   (28 Apr 2010 @ 13:48)
What's a KZ kart, sounds Czechoslovakian.  by 'alanrr'   (28 Apr 2010 @ 15:24)
Re: What's a KZ kart, sounds Czechoslovakian.  by 'buzzinrussell'   (28 Apr 2010 @ 15:26)
Buzzin' hour for hour, it is!!!!!!!!!!!!!! (nt)  by 'alanrr'   (28 Apr 2010 @ 15:27)
Re: What's a KZ kart, sounds Czechoslovakian.  by 'alanrr'   (28 Apr 2010 @ 15:26)
Re: What's a KZ kart, sounds Czechoslovakian.  by 'michaelg36'   (28 Apr 2010 @ 15:31)
FAO: Alanrr - KZ 1/2 = 125 Gearbox  by 'andy2004uk90'   (28 Apr 2010 @ 15:39)
Re: FAO: Alanrr - KZ 1/2 = 125 Gearbox  by 'kai'   (28 Apr 2010 @ 15:51)
Konzentrationslager! Oh blimey, are the regs...  by 'alanrr'   (28 Apr 2010 @ 16:27)
Re: Konzentrationslager! Oh blimey, are the regs..  by 'LRT'   (28 Apr 2010 @ 21:25)
Re: Konzentrationslager! Oh blimey, are the regs..  by 'BanzaiBoy'   (28 Apr 2010 @ 23:05)
LRT.  by 'alanrr'   (29 Apr 2010 @ 12:40)

Hooton  by 'Crashlanding'   (26 Apr 2010 @ 14:19)

Senior TKM - Welsh Champs @ Llandow  by 'Iwan'   (26 Apr 2010 @ 9:00)
Re: Senior TKM - Welsh Champs @ Llandow  by 'speedyman'   (26 Apr 2010 @ 22:05)

is it best to have a filter between tank and pump  by 'Simon43'   (25 Apr 2010 @ 20:28)
Re: is it best to have a filter between tank and p  by 'BrownTeamRacing'   (25 Apr 2010 @ 22:37)
Re: is it best to have a filter between tank and p  by 'smiddy'   (25 Apr 2010 @ 22:52)
Re: is it best to have a filter between tank and p  by 'buzzinrussell'   (26 Apr 2010 @ 10:07)
Re: is it best to have a filter between tank and p  by 'Cburton'   (26 Apr 2010 @ 20:07)
Re: is it best to have a filter between tank and p  by 'Simon43'   (27 Apr 2010 @ 12:40)
Re: is it best to have a filter between tank and p  by 'mlbeave'   (27 Apr 2010 @ 13:16)
Re: is it best to have a filter between tank .85p  by 'Trev'   (27 Apr 2010 @ 13:45)
Re: is it best to have a filter between tank and p  by 'Simon43'   (27 Apr 2010 @ 13:48)
Oh..... the confusion in this thread.......!  by 'itpro'   (27 Apr 2010 @ 15:33)
Re: Oh that filter  by 'mlbeave'   (27 Apr 2010 @ 16:13)

Mark Webber Whilton Mill  by 'SAS'   (25 Apr 2010 @ 19:24)

intrepid bearing carriers jkh v4  by 'jkhintrepid77'   (25 Apr 2010 @ 17:20)
Re: intrepid bearing carriers jkh v4  by 'stemorton46'   (25 Apr 2010 @ 19:26)

Storm TKM axle medium/soft  by 'JCC'   (25 Apr 2010 @ 16:11)
Re: Storm TKM axle medium/soft  by 'MrvanEs'   (25 Apr 2010 @ 20:12)
Re: Storm TKM axle medium/soft  by 'deangwigan'   (26 Apr 2010 @ 8:34)
Re: Storm TKM axle medium/soft  by 'Cole60'   (26 Apr 2010 @ 16:48)

WTP B1 engine parts  by 'poddy'   (25 Apr 2010 @ 13:39)
Re: WTP B1 engine parts  by 'DCharity'   (25 Apr 2010 @ 15:04)

wet set up  by 'smiddy'   (25 Apr 2010 @ 7:07)
Re: wet set up  by 'buzzinrussell'   (25 Apr 2010 @ 19:01)
Re: wet set up  by 'smiddy'   (25 Apr 2010 @ 19:32)
Re: wet set up  by 'chriskasch'   (25 Apr 2010 @ 21:01)


 
Jump to page : 1 ... 168 169 170 171 - 172 - 173 174 175 176 ... 315 


[ UK Karting Main Index ]


News Karts and Karting Notice Board Market Place Companies Directory Tracks Directory Events Calendar Race Results Photo Gallery Links
News Karts &
Karting
Notice
Board
Market
Place
Companies
Directory
Tracks
Directory
Events
Calendar
Race
Results
Photo
Gallery
Links

UK Karting

Copyright © 1996-2018 UK Karting
Comments, Suggestions etc. [email protected]