Check to see iof you havfe a choice of 'mounting holes' in the pedal and/or the mastyer cylinder lever (or whatever). The holes to which I am referring are for the pull cable/rod. If there are options up/down the pedal/lever then you need to think about which holes to use. Thye clue is as follows:-
1) The further UP the pedal/master-cylinder-lever:-
* less pedal movement * More foot pressure needs to be applied * more feed-back from the brakes through your foot
2) The further DOWN the pedal/master-cylinder-lever:-
* Pedal travels further but gives a more subtle range of 'foot pressures' available to you * Less foot-pressure needs to be applied * Reduced feed-back
My current suspicion is that your old kart had it's cable-pullrod mounted further DOWN the pedal/lever than your current kart and thus, perhaps, you should move your cable/pullrod DOWNward!
Ian
|
|