So people will be putting a load of grease on again with the caveat below...
Rotax New Steel Clutch: The Rotax classes are affiliated to J.A.G, the importer, and the ABkC, and they jointly wish to clarify the situation regarding grease or oil on the new steel clutch as follows. BRP Powertrain advise that as the needle bearing for the clutch drum must be lubricated by use of grease (according to the service manual), it cannot be avoided that some grease may get into the clutch drum and onto the clutch element. The existence of oil or grease at the inside of the clutch drum, or on the clutch element, is not in itself a reason for technical disqualification. They state that oil or grease inside the centrifugal clutch will not result in any technical advantage or in an improved lap time: Issued 20.3.09
|
|