Happy to be corrected if I'm wrong, but I believe you are allowed to run different bodywork on any chassis as long as they are CIK marked. From memory (I don't have the regs to hand at the moment) you must used matched sets, so a nose and nassau panel from the same homologation set, and the nose must be mounted to a set of bars they are homologated to be with.
There's a list of homologated bars and corresponding noses available from the MSA
https://www.msauk.org/assets/bumpersbodyworkv1.1.pdf
We had this issue last year as we were using OTK bars with a different nose and nassau panel and it was picked up at scrutineering. We simply had to change the bars (which incidentally where exactly the same shape, just not made by OTK and with a different homologation number) and they then matched the sheet above and therefore met the regs.
|
|