If you insist!
First, you need a sprocket puller:- http://www.spellfame.co.uk/cgi-bin/sh000099.cgi?REFPAGE=http%3a%2f%2fwww%2espellfame%2eco%2euk%2fkart%2dspares%2donline%2ehtml&WD=puller&PN=copy_of_TKM_Tools___Accessories%2ehtml%23a1_21487#a1_21487
at 16.85
Then a flywheel puller. That depends on which ignition system you have, Motorplat or PVL
I can't find one on Spellfame.
The PVL ignition holders would be good, too. Same page: at 14.78
A carb pressure gauge:-
same page @ 29.03
A real of solder to check the squish clearance
A Dial Indicator:-
http://www.grampianfasteners.com/Products.aspx?cat=7213899
However, you need the plug socket screw-in adaptor and I don't have time to search for that item. Talk to the kart shops about the two together. You screw the adaptor into the pulug hole, clamp the Dial Idicator into it and register how the EXACT position of the pistio fo you KNOW when the piston is at TDC!
That should be enough to start with!
Ian
|
|