UK Karting - Notice Board (2-Stroke Karting) : Re: Rotax factory solution to slipping clutches

Notice Board (2-Stroke Karting)

Re: Rotax factory solution to slipping clutches
Posted by 'Invader' on 13 May 2009 @ 19:24

| View Message Thread | Reply to this message |

InvaderJoined: July 2003
Total Posts: 2
[ View User Profile ]

I hope for one that this brings an end to the cheats that have exploited to the maximum this whole clutch fiasco I am not willing to cheat and as such have had to pull out of rotax until this matter is resolved as it is impossible to compete against a modified and greased clutch I have tested with and without grease and the advantages are too big, those who have been doing this before the recent knee jerk descision to allow creased clutches have had a massive advantage and I for one hope they are enjoying there hollow glory and plastic pots.The powers that control our sport could have and should have imposed a 3000rpm test on all rotax karts on the grid before the heats and finals it doesn't take as long as going down to the grid with your kart in bits so no excuses.Hopefully this will stop the pityful site of drivers being pushed off the grid.

Message Thread:

Rotax factory solution to slipping clutches by 'Michaelt1' (13 May 2009 @ 9:54)

what an absolute joke ! by 'David1974' (13 May 2009 @ 10:41)

Re: David 1974 - what an absolute joke ! by 'John' (13 May 2009 @ 15:50)

And your point is john? by 'David1974' (13 May 2009 @ 17:34)

Jesus Christ. by 'alanrr' (13 May 2009 @ 18:07)

Re: Jesus Christ. by 'broke' (13 May 2009 @ 19:05)

Re: Jesus Christ. by 'DavyBoy' (14 May 2009 @ 10:03)

Re: Jesus Christ. by 'BanzaiBoy' (14 May 2009 @ 11:21)

Re: Rotax factory solution to slipping clutches by 'Maximus' (13 May 2009 @ 11:02)

Re: Rotax factory solution to slipping clutches by 'michaelg36' (13 May 2009 @ 11:05)

Re: Rotax factory solution to slipping clutches by 'Michaelt1' (13 May 2009 @ 15:46)

Re: Rotax factory solution to slipping clutches by 'pez' (13 May 2009 @ 17:54)

Re: Rotax factory solution to slipping clutches by 'Invader' << You are here!

Re: Rotax factory solution to slipping clutches by 'SkidSolo' (13 May 2009 @ 22:28)

Re: Rotax factory solution to slipping clutches by 'broke' (13 May 2009 @ 19:11)

Re: Rotax factory solution to slipping clutches by 'razh54' (13 May 2009 @ 19:27)

Re: Rotax factory solution to slipping clutches by 'DanTheK1RaceGearMan' (13 May 2009 @ 22:48)

How about... by 'michaelg36' (14 May 2009 @ 0:07)

and you will all be complaining about ... by 'Chad' (14 May 2009 @ 0:22)

Re: and you will all be complaining about ... by 'oldun' (14 May 2009 @ 0:55)

Oldun by 'michaelg36' (14 May 2009 @ 1:04)

Re: Oldun by 'oldun' (14 May 2009 @ 1:15)

Rotax has pushed the self discruct button by 'F6Super2KID' (14 May 2009 @ 12:06)

Re: The solution is easy by 'Focused' (14 May 2009 @ 15:46)

Re: The solution is easy by 'DavyBoy' (14 May 2009 @ 16:54)

So is it a stall test or a 'move under 3000rpm by 'alanrr' (14 May 2009 @ 9:55)

MINI 0R 177 by 'F6Super2KID' (14 May 2009 @ 12:03)

you obviously don't understand ... by 'Chad' (14 May 2009 @ 14:05)

Chad, we have a stool test in Blighty..... by 'alanrr' (14 May 2009 @ 15:01)

Re: Chads stall test... by 'QuickOldTimer' (14 May 2009 @ 17:20)

Re: Chads stall test... by 'alanrr' (14 May 2009 @ 17:38)

anyone with half a brain knows that the.. by 'Chad' (14 May 2009 @ 22:33)

Re: anyone with half a brain knows that the.. by 'buzzinrussell' (14 May 2009 @ 23:19)

Re: anyone with half a brain knows that the.. by 'alanrr' (15 May 2009 @ 11:28)

Re: anyone with half a brain knows that the.. by 'JonWright' (15 May 2009 @ 12:23)

Re: alanrr by 'buzzinrussell' (15 May 2009 @ 13:23)

Re: alanrr by 'alanrr' (15 May 2009 @ 16:32)

Re: So is it a stall test or a 'move under 3000rpm by 'qedrat' (15 May 2009 @ 12:08)

Re: So is it a stall test or a 'move under 3000rpm by 'chriskasch' (15 May 2009 @ 12:26)

Re: So is it a stall test or a 'move under 3000rpm by 'DavyBoy' (15 May 2009 @ 13:33)

Re: Have Rotax changed any Rules? by 'John' (15 May 2009 @ 16:28)

You brought Rotax shares John? (nt) by 'alanrr' (15 May 2009 @ 16:34)

Re: You brought Rotax shares John? (nt) by 'razh54' (15 May 2009 @ 23:32)

How on Earth do we know the score- the ref is a by 'JonWright' (16 May 2009 @ 0:06)

Re: How on Earth do we know the score- the ref is by 'razh54' (16 May 2009 @ 1:51)

Re: Alan? by 'John' (16 May 2009 @ 15:02)

Re: Alan? by 'Invader' (16 May 2009 @ 18:46)

Re: Alan? by 'broke' (16 May 2009 @ 19:26)

Re: John? by 'JonWright' (16 May 2009 @ 19:29)

Not A Solution But Ask For Clarity by 'sinky' (16 May 2009 @ 22:13)

Re: Not A Solution ask JAG by 'John' (18 May 2009 @ 16:01)

Re: Not A Solution ask JAG by 'sinky' (18 May 2009 @ 22:44)

Re: Not A Solution ask JAG by 'DanTheK1RaceGearMan' (18 May 2009 @ 23:39)

Re: Dan by 'John' (19 May 2009 @ 17:08)

Re: Dan by 'oldun' (19 May 2009 @ 21:56)

Re: Dan by 'John' (20 May 2009 @ 15:21)

Re: Dan by 'DanTheK1RaceGearMan' (20 May 2009 @ 15:45)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links