UK Karting - Notice Board (2-Stroke Karting) : Re: Not A Solution ask JAG

Notice Board (2-Stroke Karting)

Re: Not A Solution ask JAG
Posted by 'DanTheK1RaceGearMan' on 18 May 2009 @ 23:39

| View Message Thread | Reply to this message |

DanTheK1RaceGearManJoined: March 2006
Total Posts: 1
[ View User Profile ]

Sinky, you're spot on with your point!
Old engines used to cost around �12-1300+vat new, now min �1750+vat, on top of that the reportedly faster 09 barrel has effectively rendered any pre-09 barrelled engine worthless!

My engine is only 5hours from its 1st rebuild and technically I'd have to go spend another �700+vat minimum to get it anywhere near the front end or to get any money for it if I wanted to sell.

JAG have effectively condemned all the pre-09 generation engines to "hobby engines".

I haven't done a race yet this season, preferred to mechanic and get the occasional drive in my driver's outfit. Aside for the finances I simply can't be asked.

The new barrel was certainly a recession busting measure for Rotax, but nothing for the customers.

I mark the beginning of the downturn with the move from SL7 to SL6, it has been going downhill ever since, not just with the tyres but everything, the old clutch seemed to be made of cheese, the plastic gears made of butter, new clutch won't run unless full to brim with grease, SL6's are as consistent as my granddad's 1st world war stories!

If they're trying for own goal, the training is paying off already!

Dan

Message Thread:

Rotax factory solution to slipping clutches by 'Michaelt1' (13 May 2009 @ 9:54)

what an absolute joke ! by 'David1974' (13 May 2009 @ 10:41)

Re: David 1974 - what an absolute joke ! by 'John' (13 May 2009 @ 15:50)

And your point is john? by 'David1974' (13 May 2009 @ 17:34)

Jesus Christ. by 'alanrr' (13 May 2009 @ 18:07)

Re: Jesus Christ. by 'broke' (13 May 2009 @ 19:05)

Re: Jesus Christ. by 'DavyBoy' (14 May 2009 @ 10:03)

Re: Jesus Christ. by 'BanzaiBoy' (14 May 2009 @ 11:21)

Re: Rotax factory solution to slipping clutches by 'Maximus' (13 May 2009 @ 11:02)

Re: Rotax factory solution to slipping clutches by 'michaelg36' (13 May 2009 @ 11:05)

Re: Rotax factory solution to slipping clutches by 'Michaelt1' (13 May 2009 @ 15:46)

Re: Rotax factory solution to slipping clutches by 'pez' (13 May 2009 @ 17:54)

Re: Rotax factory solution to slipping clutches by 'Invader' (13 May 2009 @ 19:24)

Re: Rotax factory solution to slipping clutches by 'SkidSolo' (13 May 2009 @ 22:28)

Re: Rotax factory solution to slipping clutches by 'broke' (13 May 2009 @ 19:11)

Re: Rotax factory solution to slipping clutches by 'razh54' (13 May 2009 @ 19:27)

Re: Rotax factory solution to slipping clutches by 'DanTheK1RaceGearMan' (13 May 2009 @ 22:48)

How about... by 'michaelg36' (14 May 2009 @ 0:07)

and you will all be complaining about ... by 'Chad' (14 May 2009 @ 0:22)

Re: and you will all be complaining about ... by 'oldun' (14 May 2009 @ 0:55)

Oldun by 'michaelg36' (14 May 2009 @ 1:04)

Re: Oldun by 'oldun' (14 May 2009 @ 1:15)

Rotax has pushed the self discruct button by 'F6Super2KID' (14 May 2009 @ 12:06)

Re: The solution is easy by 'Focused' (14 May 2009 @ 15:46)

Re: The solution is easy by 'DavyBoy' (14 May 2009 @ 16:54)

So is it a stall test or a 'move under 3000rpm by 'alanrr' (14 May 2009 @ 9:55)

MINI 0R 177 by 'F6Super2KID' (14 May 2009 @ 12:03)

you obviously don't understand ... by 'Chad' (14 May 2009 @ 14:05)

Chad, we have a stool test in Blighty..... by 'alanrr' (14 May 2009 @ 15:01)

Re: Chads stall test... by 'QuickOldTimer' (14 May 2009 @ 17:20)

Re: Chads stall test... by 'alanrr' (14 May 2009 @ 17:38)

anyone with half a brain knows that the.. by 'Chad' (14 May 2009 @ 22:33)

Re: anyone with half a brain knows that the.. by 'buzzinrussell' (14 May 2009 @ 23:19)

Re: anyone with half a brain knows that the.. by 'alanrr' (15 May 2009 @ 11:28)

Re: anyone with half a brain knows that the.. by 'JonWright' (15 May 2009 @ 12:23)

Re: alanrr by 'buzzinrussell' (15 May 2009 @ 13:23)

Re: alanrr by 'alanrr' (15 May 2009 @ 16:32)

Re: So is it a stall test or a 'move under 3000rpm by 'qedrat' (15 May 2009 @ 12:08)

Re: So is it a stall test or a 'move under 3000rpm by 'chriskasch' (15 May 2009 @ 12:26)

Re: So is it a stall test or a 'move under 3000rpm by 'DavyBoy' (15 May 2009 @ 13:33)

Re: Have Rotax changed any Rules? by 'John' (15 May 2009 @ 16:28)

You brought Rotax shares John? (nt) by 'alanrr' (15 May 2009 @ 16:34)

Re: You brought Rotax shares John? (nt) by 'razh54' (15 May 2009 @ 23:32)

How on Earth do we know the score- the ref is a by 'JonWright' (16 May 2009 @ 0:06)

Re: How on Earth do we know the score- the ref is by 'razh54' (16 May 2009 @ 1:51)

Re: Alan? by 'John' (16 May 2009 @ 15:02)

Re: Alan? by 'Invader' (16 May 2009 @ 18:46)

Re: Alan? by 'broke' (16 May 2009 @ 19:26)

Re: John? by 'JonWright' (16 May 2009 @ 19:29)

Not A Solution But Ask For Clarity by 'sinky' (16 May 2009 @ 22:13)

Re: Not A Solution ask JAG by 'John' (18 May 2009 @ 16:01)

Re: Not A Solution ask JAG by 'sinky' (18 May 2009 @ 22:44)

Re: Not A Solution ask JAG by 'DanTheK1RaceGearMan' << You are here!

Re: Dan by 'John' (19 May 2009 @ 17:08)

Re: Dan by 'oldun' (19 May 2009 @ 21:56)

Re: Dan by 'John' (20 May 2009 @ 15:21)

Re: Dan by 'DanTheK1RaceGearMan' (20 May 2009 @ 15:45)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links