For the TMK9C
Start with 300 fuel valve, 50 over 48 for the idle jet/emulsion tube combo, K28 needle, DQ270 needlejet and a mainjet of 178 and then first enter the pressure/temperature and humidity working your way down the mainjets until you are happy with the engines performance. Having completed this exercise once you then just enter the pressure/temperature and humidity and read off the needle clip and mainjet as your original baseline testing is locked into the software.
If you ever get to 130 to 145 mainjet setting is just a matter of examination of the piston crown and engine temperatures, but be careful unless you like re-building engines, don't forget it's about engine performance not a contest of who can run the leanest jet!
|
|