UK Karting - Notice Board (2-Stroke Karting) : Re: X30 Update....20 hours run

Notice Board (2-Stroke Karting)

Re: X30 Update....20 hours run
Posted by 'maxdad' on 03 Dec 2013 @ 16:26

| View Message Thread | Reply to this message |

maxdadJoined: September 2007
Total Posts: 1
[ View User Profile ]

Hi James, obviously I can only comment on the two engines we have. Both came from France and were optimized to �their� fiche. As you can appreciate no two engines are ever the same, but our two do seem very well matched. Both measure up well on ports etc. and this does reflect well on the dyno/track. The guys we bought them did suggest that there were rare �monster� engines in France but nothing like the wide variation they had found in Rotax. None of the parts in our engines are specially selected and both have the same barrel and crank assembly original fitted (early 2012). Piston and rods have been replaced along the way, so I can only surmise that the engines will indeed be well matched. However it goes without saying, sadly, that the �fat wallet� effect will come round once UK tuners get a look in. At present I don�t see there is a lot of room to improve on the basic unit, as long as JM use the World Wide Fiche that IAME supply. Only time will tell, performance and cost controls rely lie in the importers hands. But at present I would say YES!!

Message Thread:

X30 Update....20 hours run by 'maxdad' (28 Nov 2013 @ 9:53)

Re: X30 Update....20 hours run by 'BanzaiBoy' (30 Nov 2013 @ 20:48)

Re: X30 Update....20 hours run by 'maxdad' (01 Dec 2013 @ 19:11)

Re: X30 Update....20 hours run by 'BanzaiBoy' (02 Dec 2013 @ 22:22)

Re: X30 Update....20 hours run by 'JamesC' (03 Dec 2013 @ 10:23)

Re: X30 Update....20 hours run by 'maxdad' (03 Dec 2013 @ 12:14)

Re: X30 Update....20 hours run by 'maxdad' (03 Dec 2013 @ 12:03)

Re: X30 Update....20 hours run by 'JamesC' (03 Dec 2013 @ 13:09)

Re: X30 Update....20 hours run by 'JamesC' (03 Dec 2013 @ 13:10)

Re: X30 Update....20 hours run by 'BanzaiBoy' (03 Dec 2013 @ 21:31)

Re: X30 Update....20 hours run by 'maxdad' << You are here!

Re: X30 Update....20 hours run by 'JamesC' (04 Dec 2013 @ 12:44)

Re: X30 Update....20 hours run by 'maxdad' (04 Dec 2013 @ 21:18)

Re: X30 Update....20 hours run by 'JamesC' (05 Dec 2013 @ 13:14)

Re: X30 Update....20 hours run by 'CT79' (06 Dec 2013 @ 18:25)

Re: X30 Update...mounting plate by 'maxdad' (07 Dec 2013 @ 14:31)

Re: X30 Update...mounting plate by 'CT79' (07 Dec 2013 @ 15:07)

Re: X30 Update...mounting plate by 'maxdad' (07 Dec 2013 @ 19:57)

Re: X30 Update....20 hours run by 'GlennGuest23' (08 Dec 2013 @ 17:39)

Re: X30 Update....GB spec by 'maxdad' (08 Dec 2013 @ 21:16)

Re: X30 Update....GB spec by 'GlennGuest23' (09 Dec 2013 @ 18:49)

Re: X30 Update....GB spec by 'maxdad' (13 Dec 2013 @ 22:19)

Re: X30 Update....20 hours run by 'BrianP' (30 Nov 2013 @ 21:41)

Re: X30 Update....20 hours run by 'maxdad' (01 Dec 2013 @ 19:15)

Re: X30 Update....20 hours run by 'BrianP' (01 Dec 2013 @ 20:35)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links