UK Karting - Notice Board (4-Stroke Karting) : Re: Ian, cannot post above!

Notice Board (4-Stroke Karting)

Re: Ian, cannot post above!
Posted by 'John' on 31 Oct 2008 @ 10:46

| View Message Thread | Reply to this message |

JohnJoined: August 2001
Total Posts: 1
[ View User Profile ]

Ian, you ask:
�Would your comment mean that IF ANY manufacturer built an engine which lasted for 1,000 years without ANY servicing that you could NEVER drive it until the first ONE HAD been serviced after 1,000 years???????�

Now given that no engine manufacturer does then this is NOT a real question is it?
Any manufacturer making such an engine at a reasonable cost could expect everybody would buy one, now if this is the case with the XR50 then why not just say that? Because you cannot, all engines and their internal parts have a recommended service life and when raced that service life comes down.

To race a MAX at any club in the country one rebuild per season is a reasonable expectation, that rebuild may cost around �200 - �300.

The simple question is how much does a rebuild cost for the XR50? From what you and others have said maybe just maybe it is a bi-annual cost, but maybe it is not when raced?

For instance the recent change to ceramic rotor seals and the addition of a rev limiter built into the coil have been made for a reason, presumably as a result of failures due to over-revving and in the case of the rotor seals overheating hence the introduction of the Dellorto.

All I am asking and I know I could email [email protected] , HOW MUCH DOES A REBUILD COST?

Message Thread:

Vampire? Are they doing a 'Biland'????? by 'itpro' (28 Oct 2008 @ 9:50)

Re: Vampire? Are they doing a 'Biland'????? by 'Bertoliniii' (28 Oct 2008 @ 20:38)

Re: Vampire? Are they doing a 'Biland'????? by 'itpro' (28 Oct 2008 @ 23:46)

Re: Vampire? Are they doing a 'Biland'????? by 'lard ass bob' (29 Oct 2008 @ 8:28)

Re: Vampire? Are they doing a 'Biland'????? by 'itpro' (29 Oct 2008 @ 10:06)

Re: Vampire? Are they doing a 'Biland'????? by 'BrianP' (29 Oct 2008 @ 10:16)

Re: Vampire? Are they doing a 'Biland'????? by 'kai' (29 Oct 2008 @ 10:32)

Re: Vampire? Are they doing a 'Biland'????? by 'itpro' (29 Oct 2008 @ 10:43)

Other companies duded by the CIK .. by 'Chad' (29 Oct 2008 @ 11:04)

Re: Other companies duded by the CIK .. by 'itpro' (29 Oct 2008 @ 11:21)

Re: Other companies duded by the CIK .. by 'kai' (29 Oct 2008 @ 11:21)

Re: Vampire? Are they doing a 'Biland'????? by 'BrianP' (29 Oct 2008 @ 11:08)

Re: Vampire? Are they doing a 'Biland'????? by 'itpro' (29 Oct 2008 @ 11:18)

Re: Vampire? Are they doing a 'Biland'????? by 'TheLegend' (29 Oct 2008 @ 11:55)

Re: Vampire? Are they doing a 'Biland'????? by 'BrianP' (29 Oct 2008 @ 14:49)

Re: Vampire? Are they doing a 'Biland'????? by 'itpro' (29 Oct 2008 @ 14:53)

Re: Vampire? Are they doing a 'Biland'????? by 'jc123rules' (29 Oct 2008 @ 15:43)

Re: Vampire? Are they doing a 'Biland' ? by 'positivekarter' (29 Oct 2008 @ 15:52)

Re: Vampire? Are they doing a 'Biland' ? by 'jc123rules' (29 Oct 2008 @ 16:06)

Re: Vampire? Are they doing a 'Biland' ? by 'Boosta' (29 Oct 2008 @ 16:51)

Re: Vampire? Are they doing a 'Biland' ? by 'Stig' (29 Oct 2008 @ 17:15)

Re: Vampire? Are they doing a 'Biland' ? by 'kai' (30 Oct 2008 @ 0:12)

Re: Vampire? Are they doing a 'Biland' ? by 'John' (30 Oct 2008 @ 0:16)

Re: Vampire? Are they doing a 'Biland' ? by 'itpro' (30 Oct 2008 @ 1:17)

Re: Vampire? Are they doing a 'Biland' ? by 'John' (30 Oct 2008 @ 13:44)

Running cost? Absolutely ZERO! by 'itpro' (30 Oct 2008 @ 14:49)

Re: Running cost? Real costs Please! by 'John' (30 Oct 2008 @ 15:31)

Re: Running cost? Real costs Please! by 'kai' (30 Oct 2008 @ 15:39)

Re: Running cost? Real costs Please! by 'itpro' (30 Oct 2008 @ 16:15)

Re: Running cost? Real costs Please! by 'John' (30 Oct 2008 @ 17:58)

Errrr..... by 'itpro' (30 Oct 2008 @ 18:35)

Re: Errrr..... by 'Bertoliniii' (30 Oct 2008 @ 19:02)

Berti by 'itpro' (31 Oct 2008 @ 10:14)

Re: Running cost? Real costs Please! by 'kai' (31 Oct 2008 @ 7:46)

Re: Running cost? Real costs Please! by 'John' (31 Oct 2008 @ 8:53)

Re: Running cost? Real costs Please! by 'itpro' (31 Oct 2008 @ 10:07)

Re: Boosta - SA by 'kai' (30 Oct 2008 @ 15:44)

Re: Boosta - SA by 'Boosta' (30 Oct 2008 @ 20:24)

Re: Boosta - SA by 'wizkid911' (30 Oct 2008 @ 21:28)

Re: Boosta - SA by 'Boosta' (31 Oct 2008 @ 11:15)

Errr, Rene, I agree with you but we are WRONG! by 'itpro' (29 Oct 2008 @ 19:25)

Re: Errr, Rene, I agree with you but we are WRONG! by 'jc123rules' (29 Oct 2008 @ 19:35)

Glad you both admitted you are wrong .. by 'Chad' (30 Oct 2008 @ 1:32)

Rene, I agree with you but we are WRONG! by 'positivekarter' (30 Oct 2008 @ 8:48)

Re: Ian, cannot post above! by 'John' << You are here!

Re: Ian, cannot post above! by 'stecrmh51' (31 Oct 2008 @ 11:20)

Re: Ian, cannot post above! by 'kai' (31 Oct 2008 @ 12:11)

Re: Ian, cannot post above! by 'John' (31 Oct 2008 @ 12:35)

Re: Ian, cannot post above! by 'Boosta' (31 Oct 2008 @ 12:45)

Re: Ian, cannot post above! by 'kai' (31 Oct 2008 @ 13:47)

Re: Ian, cannot post above! by 'John' (31 Oct 2008 @ 13:59)

Re: Ian, cannot post above! by 'kai' (31 Oct 2008 @ 14:09)

Re: Ian, cannot post above! by 'itpro' (31 Oct 2008 @ 18:23)

Re: Ian, cannot post above! by 'Boosta' (31 Oct 2008 @ 19:51)

Re: Ian, cannot post above! by 'jc123rules' (31 Oct 2008 @ 20:09)

Re: Ian, cannot post above! by 'John' (31 Oct 2008 @ 20:11)

pricing by 'Stig' (31 Oct 2008 @ 22:21)

Re: Ian, cannot post above! by 'itpro' (03 Nov 2008 @ 13:49)

Re: Ian, cannot post above! continued by 'itpro' (03 Nov 2008 @ 13:56)

again by 'itpro' (03 Nov 2008 @ 14:01)

Re: IAN, cannot post below! by 'John' (03 Nov 2008 @ 14:15)

Re: IAN, cannot post below! by 'itpro' (03 Nov 2008 @ 16:28)

Re: IAN, cannot post below! by 'John' (03 Nov 2008 @ 17:48)

Re: IAN, cannot post below! by 'itpro' (05 Nov 2008 @ 0:22)

Re: IAN, cannot post below! by 'John' (05 Nov 2008 @ 0:39)

Re: IAN, cannot post below! by 'itpro' (05 Nov 2008 @ 2:21)

Re: the future by 'kai' (05 Nov 2008 @ 9:57)

Re: the future........swiss auto by 'positivekarter' (05 Nov 2008 @ 10:39)

Re: the future........swiss auto by 'John' (05 Nov 2008 @ 11:48)

Re: Vampire? Are they doing a 'Biland'????? by 'alex64' (10 Feb 2009 @ 21:34)

Re: Vampire? Are they doing a 'Biland'????? by 'kai' (11 Feb 2009 @ 13:56)

Re: Vampire? Are they doing a 'Biland'????? by 'alex64' (12 Feb 2009 @ 14:33)

Post a Reply:

You may post a direct reply to this message which will appear in this thread.
To post a new or unrelated message use This Form. Top of Page
Notice Board Index

[ UK Karting Main Index ]


News	Karts & Karting	Notice Board	Market Place	Companies Directory	Tracks Directory	Events Calendar	Race Results	Photo Gallery	Links